Product structure:

This product is a miniature deep groove ball bearing, model MR63, with dimensional specifications of 3mm inner diameter, 6mm outer diameter, and 2.5mm width. Its structure adopts a single-row deep groove ball design, with stamped steel plate shields installed on both sides (designated as ZZ). The cage is typically made of stamped steel or high-performance engineering plastics (such as POM) to ensure precise guidance and even distribution of the steel balls.

Key performance features:

This bearing features high-speed operation capability, low friction torque, and excellent rotational precision. The double-sided metal shields effectively prevent larger dust particles and foreign objects from entering the interior, extending service life. Compared to rubber-sealed bearings, it has a more compact internal space and a higher limiting speed. However, the sealing is non-contact, making it suitable for applications sensitive to friction torque and in relatively clean environments. Its structure is simple, robust, and durable.

Main application scenarios:

It is particularly suitable for micro motors (such as drone flight control motors, micro fan motors), spindles of precision measuring instruments, high-speed dental handpieces, spindle motors for hard disk drives, moving parts of 3D printers, focusing mechanisms of optical lenses, drive shafts of remote-control model cars, pointer systems of small instruments, and precision transmission modules requiring high-speed and light-load operation.

Technical Specifications and Requirements
It is typically manufactured to ABEC-1, ABEC-3, or higher precision grades. Radial clearance often uses MC3 (Micro Clearance) or standard CN group. The rings and steel balls are made of high-carbon chromium bearing steel (such as GCr15/52100), achieving high hardness and wear resistance after heat treatment. There is a tiny gap (non-contact) between the metal shields and the outer diameter of the inner ring, resulting in a higher limiting speed compared to RS (rubber sealed) type bearings of the same size. During installation, dimensional and geometric tolerances of the shaft and housing must be ensured. Installation in a clean environment is recommended, with an appropriate amount of grease applied. The operating temperature range is typically -30°C to +120°C.

Metric Miniature Series Bearings inner diameter 1-9mm / 公制微型系列轴承内径1-9mm

内径	外径	高度		倒角(r)		基本	基本	极限转速		型号
						动负荷	静负荷	Limiting Speed		(Reference)
(D)	(D)	开放型	防尘盖型	开放型	防尘盖型	Cr(N)Basic	Cor(N)Basic	润滑脂	润滑剂	开放型	防尘盖型
		(B) (Open)	(B1) (Shield)	(Open )	(Shield)	Dynamic	Static	(Grase)	(Oil)	(Open)	(Shield)
1	3	1	一	0.05	-	80	23	130	150	681	-
	3	1.5	一	0.05	-
	4	1.6	一	0.1	-	140	36	100	120	691	-
1.5	4	1.2	2	0.05	0.05	112	33	100	120	681X	681Xzz
	5	2	2.6	0.15	0.15	237	69	85	100	691X	691Xzz
	6	2.5	3	0.15	0.15	330	98	75	90	601X	601Xzz
2	5	1.5	2.3	0.08	0.08	169	50	85	100	682	682zz
	5	2	2.5	0.1	0.1	169	50	85	100	MR52	MR52zz
	6	2.3	3	0.15	0.15	330	98	75	90	692	692zz
	6	2.5	2.5	0.15	0.15	330	98	75	90	MR62	MR62zz
	7	2.5	3	0.15	0.15	385	127	63	75	MR72	MR72zz
	7	2.8	3.5	0.15	0.15	385	127	63	75	602	602zz
2.5	6	1.8	2.6	0.08	0.08	208	74	71	80	682X	682Xzz
	7	2.5	3.5	0.15	0.15	385	127	63	75	692X	692Xzz
	8	2.5	-	0.2	-	560	179	60	67	MR82X	-
	8	2.8	4	0.15	0.15	550	175	60	71	602X	602Xzz
3	6	2	2.5	0.1	0.1	208	74	71	80	MR63	MR63zz
	7	2	3	0.1	0.1	310	111	63	75	683	683zz
	8	2.5	-	0.15	-	560	179	60	67	MR83	MR83zz
	8	3	4	0.15	0.15	560	179	60	67	693	693zz
	9	2.5	4	0.2	0.15	570	187	56	67	MR93	MR93zz
	9	3	-	0.15	-	570	187	56	67	603	603zz
	10	4	4	0.15	0.15	630	218	50	60	623	623zz
	13	5	5	0.2	0.2	1300	485	40	48	633	633zz
4	7	2	2.5	0.1	0.1	310	115	60	67	MR74	MR74zz
	8	2	3	0.15	0.1	395	139	56	67	MR84	MR84zz
	9	2.5	4	0.1	0.1	640	225	53	63	684	684zz
	10	3	4	0.2	0.15	585	204	48	56	MR104	MR104zz
	11	4	4	0.15	0.15	960	345	48	56	694	694zz
	12	4	4	0.2	0.2	960	345	48	56	604	604zz
	13	5	5	0.2	0.2	1300	485	40	48	624	624zz
	16	5	5	0.3	0.3	1730	670	36	43	634	634zz
5	8	2	2.5	0.1	0.1	310	120	56	63	MR85	MR85zz
	9	2.5	3	0.15	0.15	430	168	50	60	MR95	MR95zz
	10	3	4	0.15	0.15	430	168	50	60	MR105	MR105zz
	11	-	4	0.15	0.15	716	282	45	53	MR115	MR115zz
	11	3	5	0.15	0.15	715	281	45	53	685	685zz
	13	4	4	0.2	0.2	1080	430	43	50	695	695zz
	14	5	5	0.2	0.2	1330	505	40	50	605	605zz
	16	5	5	0.3	0.3	1730	670	36	43	625	625zz
	19	6	6	0.3	0.3	2340	885	32	40	635	635zz
6	10	2.5	3	0.15	0.1	495	218	45	53	MR106	MR106zz
	12	3	4	0.2	0.15	715	292	43	50	MR126	MR126zz
	13	3.5	5	0.15	0.15	1080	440	40	50	686	686zz
	15	5	5	0.2	0.2	1730	670	40	45	696	696zz
	17	6	6	0.3	0.3	2260	835	38	45	606	606zz
	19	6	6	0.3	0.3	2340	885	32	40	626	626zz
	22	7	7	0.3	0.3	3300	1370	30	36	636	636zz
7	11	2.5	3	0.15	0.1	455	201	43	50	MR117	MR117zz
	13	3	4	0.2	0.15	540	276	40	48	MR137	MR137zz
	14	3.5	5	0.15	0.15	1170	510	40	50	687	687zz
	17	5	5	0.3	0.3	1610	710	36	43	697	697zz
	19	6	6	0.3	0.3	2340	885	36	43	607	607zz
	22	7	7	0.3	0.3	3300	1370	30	36	627	627zz
	26	9	9	0.3	0.3	4050	1620	28	34	637	637zz
8	12	2.5	3.5	0.15	0.1	545	275	40	48	MR128	MR128zz
	14	3.5	4	0.2	0.15	820	385	38	45	MR148	MR
	16	4	5	0.2	0.2	1260	590	36	43	688	688zz
	19	6	6	0.3	0.3	2240	910	36	43	698	698zz
	22	7	7	0.3	0.3	3300	1370	34	40	608	608zz
	24	8	8	0.3	0.3	3350	1430	28	34	628	628zz
	28	9	9	0.3	0.3	4550	1970	28	34	638	638zz
9	14	3	4.5	0.3	0.3	919	468	36	42	679	679zz
	17	4	5	0.2	0.2	1330	665	36	43	689	689zz
	20	6	6	0.3	0.3	1720	840	34	40	699	699zz
	24	7	7	0.3	0.3	3350	1430	32	38	609	609zz
	26	8	8	0.3	0.3	4550	1970	28	34	629	629zz
	30	10	10	0.6	0.6	5100	2390	24	30	639	639zz

Obtain Certificate / 证书:

About US  / 关于我们

Ningbo Zhouxin International Trade Co., Ltd. was established in 2025, headquartered in Ningbo, an open coastal city in eastern China, focusing on technology development and global sales in the field of bearings and hardware accessories. The company relies on the strong manufacturing foundation of its parent company ------ 12,000 ㎡ modern production plant, 70+ automated production lines, 100+ professional technical team, 10+ years of precision manufacturing experience, and ISO/RoHS/CE certification. Products are widely used in fields such as household appliances, food machinery, fitness equipment, power tools, motor vehicles, medical devices, and robotics.Core Corporate Advantages:

> Precision & Stability Genes: 22 full-chain quality inspection processes strictly control tolerances to ±0.01mm.

> Customized Services: ODM/OEM flexible production.

> Resource Synergy Network: Sharing parent company's large-scale intelligent production lines, ensuring delivery of tens of millions of orders.

宁波轴心国际贸易有限公司成立于2025年，总部位于中国东部沿海开放城市宁波，专注轴承及五金配件领域的技术开发与全球销售。依托母公司雄厚的制造基础——12000㎡现代化生产厂房、70+自动化产线、100+专业技术团队，10+年精密制造经验，并通过ISO/RoHS/CE认证，产品广泛应用于家电、食品机械、健身器材、电动工具、机动车辆、医用器械 企业核心优势：

> 精密稳定基因：22道全链质检工序严控公差±0.01mm

> 定制化服务：ODM/OEM柔性

> 资源协同网络：共享母公司规模化智能产线，保障千万级

Contact 立即联系